sr-users July 2004

sr-users@lists.kamailio.org

178 participants
449 discussions

[Serusers] SER to be used to forward Calls to/from an ITSP from Asterisk

by Chris

Hello, I'm very new to SER, been using * for a couple months.... I don't mean to ask stupid questions, but I'm finding it hard to find any examples of using SER to REGISTER to a VoIP provider like Iconnecthere or Broadvoice and forward calls TO/FROM *... All phones will register to Asterisk. Asterisk in turn will register to SER which will pass that registration info on to the SIP Provider... So if someone calls from PSTN it would go PSTN => SIP-PROVIDER => SER => * => My Phone And if I made a call: My Phone => * => SER => SIP-PROVIDER => PSTN The reason I want to do this is because * does not support outbound proxies, round-robin DNS or RTP over TCP... Things I kinda want... If anyone can point me to some examples or maybe help me out I would appreciate it... I've tried WIKI and searching this list, the closest I could come was this post... http://lists.iptel.org/pipermail/serusers/2004-June/008916.html but I can't understand most of it... it looks like he's doing basically what I want to do, but I am unfamiliar with the config file syntax... I've tried reading the manual and the faq, but it dosen't really help when it comes to passing things to/from *... -Thank you for any help you can give Chris

20 years

[Serusers] how to upgrade mysql to ver4.0+

by Linda Xiao

Hi, Can someone illustrate the steps on how to upgrade mysql from ver3.23 to ver4.0? Basically I just want to use serweb-missed-calls feature. I have installed ser using rpm and the version is 0.8.12. and recompiled acc module for mysql support. I can see some records in the missed-call table by using mysql command. Thanks and Best Regards -------------------------------------------------------------- Linda Xiao

20 years

[Serusers] problem with "serctl add "...

by Murat Mehmet

Hello all, Both of my mysql and ser servers are running !. I have uncommented some lines on "ser.cfg" file. But I have problem when I want to add users with "serctl" and get the following error messages. ---------------------------------------------------------------------------------------------------------- serctl add mura password murat@iptel@org MySql password: ERROR 1045: Access denied for user: 'ser@localhost' (Using password: YES) introducing a new user to the database failed Do you have any suggestions ?. My syetem is Fedora 1, and ser version is:0.8.12. Thank you for your help. **************************************************************** Last situation of ser.cfg file ************************************************************ # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; }

20 years

Re: [Serusers] Too Many Hops

by Kapil Dhawan

Hi List I hop i have posted my query at wrong time....do u have any suggestion for the same.. regards ----- Original Message ----- From: "Kapil Dhawan" <sersavvy(a)hotmail.com> To: <sersavvy(a)hotmail.com> Cc: <serusers(a)lists.iptel.org> Sent: Sunday, July 25, 2004 6:41 AM Subject: RE: [Serusers] Too Many Hops > Hi all > > I amusing domain module for multiple domain...If i use Ip's in domain table all works fine....when we start ser. it accepts and processes requests from all those ip's but if i use domain names rather...then it doesn't work.... > > registration gets done.. > > but if 101(a)sip.abc.com calls 102@sip.abc.com....INVITE comes but No ACK or BYE...we are unable to hear from any side...kindly suggest me whats happening... > > With same case if i use alias="sip.abc.om" in ser.cfg then it works .... > > > Regards > > >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> > >To: sersavvy(a)hotmail.com > >Subject: RE: [Serusers] Too Many Hops > >Date: Sat, 24 Jul 2004 12:45:46 +0000 > > > > > >Hi All > > > >It is working with domain name also....but with a new problem now.....i am using sip1.abc.com as the domain name now when 101 calls to 102 ...invite goes to 102 properly and gets stored in acc table also...but ACK is not coming back..... > > > >7(5436) Warning: sl_send_reply: I won't send a reply for ACK!! > > > >so call is not progressing....any idea... > > > > > > > >>From: "Kapil Dhawan" <sersavvy(a)hotmail.com> > >>To: serusers(a)lists.iptel.org > >>Subject: [Serusers] Too Many Hops > >>Date: Sat, 24 Jul 2004 12:24:55 +0000 > >> > >>Hi List > >> > >>I am using domain module with 0.8.12. it was running perfect if i add multiple ip's in that table...but if i add domain names instead of ip's then i get 483 Too Many Hops. > >> > >>any possible reason for that > >> > >>regards > >> > >>_________________________________________________________________ > >>Studies, career, romance. Whatever your concerns. http://www.astroyogi.com/newMSN/ We have the answers. > >> > >>_______________________________________________ > >>Serusers mailing list > >>serusers(a)lists.iptel.org > >>http://lists.iptel.org/mailman/listinfo/serusers > > > >

20 years

[Serusers] SER process ID

by Masoud Safi

When I do a "ps -ef | grep ser" I don't get the process if for ser. When I look at the "ser.pid" file, and get the Process ID from it, then try to do a "kill <pid>" for example, it says there is no such process. However, when I send SIP messages to the server, and monitor port 5060 by ngrep, I do see registration response messages go out to my IP phone. Please help. Thanks in advance. MS _________________________________________________________________ Overwhelmed by debt? Find out how to Dig Yourself Out of Debt from MSN Money. http://special.msn.com/money/0407debt.armx

20 years

[Serusers] User Agent for for voice mail testing

by Koyama Zehi

Dear All, I need to test the voicemail functionality of SER proxy, please sugeest me some free user agent to perform this test. As I tryed with windows messanger but I conuld not succed. As with windows messanger I can communicate only with on line user (as per my best knowledge). But due to the testing of voicemail I need to send an invite request to off line user which could e lead as voice mail session. thanks .. koyama __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

20 years

[Serusers] SIP UMS Release

by Kevin English

Hello Voicemail and IVR Users, The Servpac development team (located Honolulu, Hawaii) would like announce the Alpha version of SipUMS. We ported our old OpenUMS project (http://sourceforge.net/projects/linuxvm) to the work as a SEMS/IVR plugin. Feel free to download it and try it out SipUMS: http://developer.berlios.de/projects/sipums/ In the distribution you will find detailed installation instructions. Make sure that you have set up Perl support for SEMIVR. If you run into any problems installing it, you can subscribe to our mailing list at http://lists.servpac.com and ask questions. We hope that SipUMS can grow and expand in scope and users. The system is pretty flexible and has many IVR features. Out of the box, it has a fully functional voicemail. The web interface is written in perl-CGI but is being ported to php. We look forward to getting feedback from other users in the community on this project. Kevin W. English kevin(a)x5dev.com Software Engineer, Servpac.com 808-356-0034 (w) 808-271-5125 (c)

20 years

[Serusers] Linksys WRT54G

by Michael Devenijn

Before i begin to make some work on my own : Did anybody did some basic work on implementing SER on a linksys WRT54G ? for more info : www.batbox.org/wrt54g-linux.html Kind Regards Michaël Devenijn DISCLAIMER: The content of this e-mail message does not constitute a commitment of DKMA bvba This e-mail and any attachments thereto may contain information which is confidential and/or protected by intellectual property rights and are intended for the intended recipient only. Any use of the information contained herein ( including, but not limited to, total or partial reproduction, communication or distribution in any form ) by persons other than the designated recipient(s) is prohibited.If an addressing or transmission error has misdirected this e-mail, please notify the author, either by telephone or by e-mail and delete the material from any computer.

20 years

[Serusers] using SER as a frontend to asterisk SIP/PSTN gateways?

by Roy Sigurd Karlsbakk

hi I've been told to setup a 48-PRI SIP/PSTN gateway system, and want to do this as follows: 1 SER server proxying all incoming SIP connections 12 asterisk servers with 4 E1 PRIs each doing the actual SIP/PSTN gatewaying 1 database server for number routing, call details and authentication info Questions: - How can I setup SER to forward up to 120 calls per asterisk node before switching to another one? does SER keep a list of open RTP connections to the box forwarded to? - Can multiple SER boxes be used for failover or load balancing? thanks roy

20 years

[Serusers] ERROR: acc_rad_request: radius-ing failed

by Rafael J. Risco G.V.

Hi please someone help me... IŽm still having problems to obtain radius accounting and I found this error in the debug file: . . 7(7511) ERROR: acc_rad_request: radius-ing failed 7(7511) DEBUG: cleanup_uacs: RETR/FR timers reset 7(7511) DEBUG: add_to_tail_of_timer[2]: 0x402f59b8 7(7511) receive_msg: cleaning up 5(7509) ERROR: acc_rad_request: radius-ing failed 5(7509) SER: forwarding ACK statelessly 5(7509) DEBUG: mk_proxy: doing DNS lookup... 5(7509) check_via_address(200.110.6.58, 200.110.6.58, 0) 5(7509) Sending: ACK sip:6603000@10.0.0.236 SIP/2.0 Record-Route: <sip:6603000@200.110.2.132;ftag=4040fe43a4;lr=on> Via: SIP/2.0/UDP 200.110.2.132;branch=0 Via: SIP/2.0/UDP 200.110.6.58:5060;branch=z9hG4bK4040fe43a418 From: <sip:6604000@200.110.2.132>;tag=4040fe43a4 To: <sip:6603000@200.110.2.132>;tag=8e006a06a4 Call-ID: 40d9ba40-16dd-fe9c-8043-0002a4005564(a)200.110.6.58 CSeq: 18 ACK Route: <sip:6603000@200.110.2.132;ftag=4040fe43a4;lr=on> Content-Length: 0 Max-Forwards: 69 . . this error appears only when I try "setflag(1)" for the transactions I want to account, also in this case the ACK message it comes too late (not when pick Up the phone...). these are some details of my installation: - SuSE Linux 9.0 (i586) - ser-0.8.12 - I have followed "radius-how-to" very carefully. - radiusclient-0.3.2 - freeradius-0.9.3 (installed in the same host with ser) - I`m Not using mysql (do I have to use it??) - my current ser.cfg and endpoints configuration are shown below thanks. Rafael Risco PS: Config Files: # # ----------- global configuration parameters ------------------------ # debug=3 # debug level (cmd line: -dddddddddd) # fork=yes # log_stderror=no # (cmd line: -E) #/* Uncomment these lines to enter debugging mode debug=6 fork=yes log_stderror=yes #*/ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # loadmodule "/usr/local/lib/ser/modules/uri.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" # loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" loadmodule "/usr/local/lib/ser/modules/acc.so" # load the NAT Helper Module # loadmodule "/usr/local/lib/ser/modules/nathelper.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- # modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line # modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # modparam("acc","log_level",1) modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("auth_radius","service_type",15) modparam("acc","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("acc", "service_type", 15) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 3) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing # if (loose_route()) { # t_relay(); # break; # }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (method=="REGISTER") { log(1, "REGISTER: Authenticating user\n"); if (!radius_www_authorize("")) { log(1, "REGISTER: challenging user\n"); www_challenge("", "0"); break; }; save("location"); break; }; if (method=="INVITE") { log(1, "INVITE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL\n"); setflag(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); break; }; } ######################################################################## Example of one endpoint config: VoiceFinder Gateway Series (http://www.addpac.com) AP200B System software Revision 8.10 ! ! VoIP configuration. ! ! ! Voice service voip configuration. ! voice service voip fax protocol t38 redundancy 0 fax rate 9600 h323 call start fast no force-starth245 busyout monitor gatekeeper busyout monitor voip-interface display send e164 ! ! ! Voice port configuration. ! voice-port 0/0 ! FXS caller-id enable ! ! voice-port 0/1 ! FXS caller-id enable ! ! ! ! ! Pots peer configuration. ! dial-peer voice 0 pots destination-pattern 6600020 port 0/0 call-waiting ! dial-peer voice 1 pots destination-pattern 6603000 port 0/1 call-waiting ! ! ! ! Voip peer configuration. ! ! dial-peer voice 1002 voip destination-pattern 6604000 session target sip-server session protocol sip codec g7231r63 dtmf-relay rtp-2833 ! ! ! ! SIP UA configuration. ! sip-ua user-register sip-username 660300X sip-password 1234 sip-server 200.X.2.132 register e164 ! ! ! MGCP configuration. ! mgcp codec g711ulaw ! ! ! Tones ! ! voip-interface ether0.0 ! agent00 #

20 years

← Newer
1
...
8
9
10
11
12
13
14
...
45
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2004